The DC-395/315 Series controllers support ASPI (Advanced SCSI Programming Interface) managers for the following operating systems: MS-DOS, Windows 95/98/NT, OS/2 WARP, NetWare. Other enhanced SCSI-2 features such as scatter-gather and command-tag queuing are supported. Internal SCSI-2 Cables Included. Max Xfer Rate Supported is 20 MB/S (DC-395U/DC-315U). Maximum devices supported are and 7 (DC-395U/DC-315U). User friendly PCI Configuration Utility for quick and easy adapter installation and system configuration
Specifications:
SCSI Chip:
Tekram S1040 Ultra SCSI Processor
SCSI devices:
DC-395U & DC-315U support a maximum of 7 devices. SCSI-2, Ultra SCSI devices are supported
SCSI bus transfers:
Async: 5MB/sec & Sync: 20MB/sec (DC-395U/DC-315U)
Data transfers:
133MB/sec (at 33MHz)
80-byte DMA FIFO for 2/4/8/16 dwords burst (PCI)
PCI Integration:
Full 32-bit PCI DMA bus master
Jumper-less design
Automatic SCSI bus termination
SCSI BIOS:
DC-395U/UW Adapters are equipped with Tekram FLASH BIOS to allow SCSI boot devices
DC-315U has NO on-board SCSI BIOS
Drivers & Utilities:
Flash utility, Installation, Low Level Format
SCO 3.2v4.2/5.0, UnixWare 2.X, OS/2 Warp, DOS, Win3.1, Win95, NT 3.5X/4.X, Netware 3.X/4.X
Connectors:
DC-395U/DC-315U
(1) 50-Pin Ultra SCSI Internal
(1) 50-Pin Ultra SCSI External
System Requirements:
1 free PCI Slot
Plug & Play BIOS on mainboard recommended
|
|
